offshoreonly.de - Forum - Poker-Run

How many horsepower are the engines ? and do you know which generation block ?

7,4 or 8,2 ? blower or atmospheric ?

set up for bravo ?

if so incl belhousing ,damper etc ?

thanks A.J

Your engine is probably healty with so little hours on it ,you can make as little horsepower as you wish by using a bigger top pulley ,and so for example run only 2-3 psi boost ,horsepower would increase by maybe aprox 100 hp ( or less),but the torque that the engine is making at lower rpm,s is what...

The blower kit will support 650 hp,but all depents on the size of the pulley,s you are going to use . The current pulley,s are set up for a 502 with 6 psi boost ,on a 454 it can be a little more because of the 800 cc less in engine volume . on the 502 the power was about 550 hp with 6 psi boost A 52...

Hey Sake


Does this count for a set 15 x 34 cleavers 3 blades too ?


reg A.J

I have one here ,its a Whipple charger with a intercooler (cupper nickel)mounted in the intake manifold for your 454 engine ,and a 1050 cfm Demon carburator with stainless breather ,complete bolt on kit with everything included for your engine,will support 650 hp . This supercharger has only 10 hour...

5 blade maximus ( used for a few hours ) 26 pitch not lab finished 900 €

info : 0031 626424360

I have a bravo 1 for sale ,its a 1,50 :1 ratio,also I have a bravo 3 for sale

Info : 0031 626424360

For sale bravo xr ,s

1 x bravo 1 xr low water pick up 1,26:1 new in box 4000 €

1 x bravo 1 xr dual water pick up 1,50:1 used 25 hrs 3500 €

2 x bravo 3 diesel new in box 1,65:1 2000€ each

info : 0031 - 626424360

Hello I have a complete bravo 1 drive for sale ,the ratio is 1,50:1 ,the unit is complete with everything that is needed to install Transom housing (rebuilt)new bellows ,bearing,new paint . inner plate oil reservoir powertrimpump&hoses powersteering cilinder the drive is in very good condition p...

You don,t need a bravo x drive for a 496 ho ,just a regular B3 will do fine. I don,t have one ,but I can get you one ,but it will take a few days for me to locate one. that must be a big heavy boat with 1,81 :1 ,have you already had a 1,81 :1 thats broken or so ? and do you have the props for it ,so...

I,ve got a new one for you with warranty,only the ratio is 1,65 :1 so the propshaft is turning +- 250 rpm faster than 1,81 on top rpm.....
I ,m asking 2200€

It would be nice if you have acces to bravo 3 props .....just to see if 1 -2 pitch less would give you the same performance

sterling

anther pic

Hello I have for sale 2 complete bravo 1 drives ratio 1,50 :1 with transoms ,powertrimpumps,oil reservoirs ,hoses ,etc complete units . the units are 1994 . The units came from a 35 Cigarette from Italy Lago Garda ,and are super clean ,no corrosion never in salt water. The owner from the Cigarette B...

Hello

Is the LH drive the bad one or the RH ?

What boat do they came from,the ratio seems a bit strange ,was it a heavy V bottem?
and how many horsepower/torque were you punishing them with ?

And what sort gearboxes ? and are those for sale too ?

sterling

Michael isn,t a scorpion 340 horsepower ? and is this a inboard tow (shaft)engine ,or a sterndrive engine ?

[quote="Searay220"]Did you get my mail?[/quote]

No I did not receive mail .

sterling

I did the best I could do,these drives are expensive and you can,t buy them cheap and 100% sure the drive is a good drive ,I mean suppose you buy one at Ebay usa ,for example 2500-3000$ and you find out when you did the install that the drive is bad ,or does not shift properly .... You will have a b...

I have one in like new condition 2 handle kiekheaffer no trim in handle ,but can be installed easy ,livorsi/gaffrig make them for kiekheaffer units.

I need 250€ for the unit

sterling

I can sell you a bravo 3 new drive (never used new in the box) with warranty 1,65:1 ratio with a rebuilt transom,and new paint all new bearing,bellows ,hing pins etc ,so the transom looked like new too. off course including trim cilinders,trimpomp,inner transom ,oil reservoir ,hoses etc etc info : 0...

sorry for the dust .its been sitting for some time ,the transom housing is ready ,I just have to pick it up .

sterling

Yes the drive is still for sale,I will try to post a pic tonight .

sterling

sorry I forgot to mention ,its 1.50:1 .

sterling

I have a complete bravo 1 drive incl transom plate ,innerplate ,powertrimpump,etc etc complete unit ,very good shape ,gimball is completely rebuilt with new rubber ,bearing ,shift boot ,etc etc ,new DD paint € 3750

tel : 0031 -626424360 ( Holland)

For sale 2 douglas skater bucket seats,white ,purple yellow.
The seats are 100% ,only used a few times .

They are made from epoxy balsa sandwich core ,and are a masterpiece.
the cushions are 6 inches thick ,so you have good confort in rough water.

600€ for both

sterling

2 brand new bravo 1 x drives ,1.50 :1 ratio dual water intakes complete with transom ,gimball housing,transom plate,trimcilinders,hoses ,trimpump,power steering cilinder .

These drives and gimballs are new in boxes ,never used brand new.

5950 € each complete drive



sterling